| SLIMline |
SLIMline DMG MORI operating system
equipped with MAPPS. The large 15-inch display can reduce the number
of switching of the screen as it provides the four-way split screen
and allows user to see more information at once. It is also possible
to customi |
| (Spindle 1) 22/15/11 kW,4,500 min-1
(Standard) |
(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15
HP), 4,500 min-1 The ALX2000 adopts a highly reliable main spindle
designed to minimize thermal displacement. The advanced spindle
labyrinth structure and the spindle air purge adopted for the
machine |
| (Spindle 2) Standard spindle 11/7.5 kW,
7,000min-1 |
(Spindle 2) Standard Spindle 11/7.5 kW (15/10 HP),
Reduced to 6,000 min-1 The Spindle 2 specification enables continuous
machining of both surfaces. The combination of rotary tools and the
Y-axis function enables integrated machining from turning to se |
| (Spindle 1) KITAGAWA 8in. Hollow Chuck
BB208A621 |
(Spindle 1) KITAGAWA 8-inch Hollow Chuck BB208A621
Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck
outer diameter: Ø 210 mm (dia.8.27 inch.) Through-hole diameter: Ø
66 mm (dia.2.6 inch.) Gripping diameter: Max. Ø 210 mm (dia. |
| (Spindle 1) Hollow Cylinder set for
KITAGAWA 8in. Hollow Chuck BB208A621 (without chuck body) |
(Spindle 1) Hollow Cylinder Set for KITAGAWA
8-inch Hollow Chuck BB208A621 (Without Chuck Body) Kitagawa hollow
cylinder and draw bar are included as a set. Chuck is not included.
Please see the chuck-cylinder combination diagram for the combination
w |
| (Spindle 2) KITAGAWA 6in. Hollow Chuck
B206A521F |
(Spindle 2) KITAGAWA 6-inch Hollow Chuck B206A521F
Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck
outer diameter: Ø 169 mm (dia.6.65 inch.) Through-hole diameter: Ø
45 mm (dia.1.77 inch.) Gripping diameter: Max. Ø 169 mm (dia. |
| (Spindle 2) Solid Cylinder set for
KITAGAWA 6in. Hollow Chuck B206A521F (without chuck body) |
(Spindle 2) Solid Cylinder Set for KITAGAWA 6-inch
Hollow Chuck B206A521F Solid cylinder Howa C1SB115 and draw pipe
R74279 are included. Chuck is not included. Please see the
chuck-cylinder combination diagram for the combination with chuck and
the speci |
| Chuck foot switch (double) for spindle 1,
2 |
Chuck foot switch (double) for spindle 1, 2 Chuck
opening and closing on spindle 1 and 2 are operated by twin chuck
footswitch. |
| Turret : Y-axis |
Turret: Y-axis It moves the turret in the Y-axis
direction. In combination with the rotary tool spindle and spindle 2,
it implements process integration for workpieces with complicated
shapes. Please refer to the turret interference diagrams for the
m |
| Standard rotary tool spindle 6,000 min-1,
7.5/5.5/3.7 kW (turret 1) |
Standard Rotary Tool Spindle 6,000 min-1, 5.5/ 3.7
Nm (Turret 1) BMT (Built-In Motor Turret) is installed with the
milling specification, and the oil jacket cooing suppresses heat
generation to implement excellent machining accuracy. Rotary tool
machini |
| Spindle 2 tailstock specifications |
Spindle 2 Tailstock Specification The
specification to push a workpiece by the center mounted in the
spindle 2 chuck. This allows you to machine the tip of the workpiece.
When using spindle 2 as a tailstock, the motor equipped with a brake
is installe |
| Preparation for automatic centering
steady rest SMW SLU-X3.2 (carriage direct-coupled) (/1000) |
Preparation for Automatic Centering Steady Rest
SMW SLU-X3.2 (Carriage Direct-coupled) (/1000) This is an I/F for
automatic centering steady rest body attachment. The steady rest
prevents vibration and deflection of a long workpiece during
machining. T |
| Chip conveyor (right discharge, hinge
type) (/1000) |
Chip Conveyor (Right Discharge, Hinge Type)
(/1000) Chips are conveyed on the hinged plates and discharged to the
right side of the machine. The hinged plate is effective in
discharging long chips. Not suitable for discharging minute powdery
chips gene |
| High-pressure coolant system (800/ 1,100
W) |
High-pressure Coolant System (800/1,100 W) It
improves the chip removing performance in cutting and the
tool/workpiece cooling capability. The high-pressure specification
coolant pump (output: 800/1,100 W (50/60 Hz) is installed for
supplying the cool |
| Mist collector Interface (duct dia. 150
mm + electric parts for AFS 1100) |
Mist collector Interface (Duct Dia 150 mm (5.905
in) + Electric Parts For AFS1100) Interface for attaching the AFS1100
mist collector to collect dust and particles and to condense oil mist
and smoke generated during the machining process. Includes the
du |
| Manual in-machine tool presetter
(pivoting type) (STD for Milling Spec.) |
Manual In-machine Tool Presetter (Pivoting Type)
It simplifies the complicated setup work at the tool change. The
position of the tool nose is measured precisely by just bringing the
tool nose into contact with the sensor, and the measured value is
fed |
| Manual in-machine tool presetter
(removable type) (Spindle 2) |
Manual In-machine Tool Presetter (Removable Type)
(Spindle 2) It simplifies the D1252871 complicated setup work at the
tool change. The position of the tool nose is measured precisely by
just bringing the tool nose into contact with the sensor, and the
measured |
| Setting Unit mm |
Setting Unit, MM The unit to be used for the
screen display and program commands is set to millimeter (mm).
Turning: MM specification for the turret Horizontal machining center:
MM specification for the tapped pallet |
| Gear Hobbing |
Gear Hobbing This function enables to make a
program with guidance and machine spur and helical gear using hob
cutter. Regarding machining possibility including machining accuracy,
please contact DMG MORI sales staff Need to select these [ NC
option |
| Alternating speed |
Alternating Speed It can suppress regenerative
chattering by fluctuating spindle speed. The cycle is automatically
calculated only by setting the fluctuation width in the guidance
screen. Regenerative chatter is created by excitation resulting from
t |
| Multi Threading |
Multi-Threading Programs for large diameter
threads or special shape threads, which are not covered by the
standard thread cutting cycle, can be created by following the
guidance. (Trapezoidal thread, Square thread, Sharp thread, Round
thread, etc.) T |
| gearSKIVING |
GearSKIVING This function enables to make a
program with guidance and machine helical, internal or external gear
using gear skiving tool. Regarding machining possibility including
machining accuracy, please contact DMG MORI sales staff Need to
select t |
| Islands, open pockets |
Islands, open pockets Islands - Programming
process can be greatly simplified because minimum input operation
is required even for the complex machining. Open pockets
Definition of open pockets eliminates tool paths with no machining
allowance, |
| High-speed canned cycle |
High-speed canned cycle The screen guidance guide
to input the stable cycle argument. One line program can command
high-speed cutting. High-speed machining cuts the machining time.
The cycle whose high speed machining complicated programming can be
do |
| Program restart |
Program restart NC unit: Mitsubishi MSX-850 When
restarting the machine after a tool has broken, after a day off or
when resuming from the middle of a program, this function specifies
the sequence number of the block where machining finished, and
machi |
| Addition of optional block skip (soft key
type 2-9) |
Addition of Optional Block Skip (Soft Key Type
2-9) 8 optional block skip functions are added. The switches for
enabling/disabling them is added on the operation panel. |
| Screen display English |
Screen display English Language on MAPPS Screen:
English Language on MAPPS Warning Screen: English Language on NC
Screen: English Language on PC Screen: English |
| Please notice, for this machine you must
have a transformer. |
Please notice, for this machine you must have a
transformer, the transformer is not part of the machine equipment and
must be ordered separately. |